The Effect of Fiber Length on Tensile Properties of Polyester Resin Composites Reinforced by the Fibers of Sansevieria trifasciata

Article Preview

Abstract:

This paper presents the study of the tensile properties of Sansevieria trifasciata – fiber (here after called STF) reinforced polyester composites. The composite sample was fabricated with five different fiber lengths of STF (2, 4, 6, 8 and 10 mm). The fabrication was made by hand lay-up technique. Mechanical properties were determined using tensile testing. An interact between fiber and matrix was observed from the SEM (scanning electron microscope) micrographs. The study reveals that the tensile strength increased with fiber length without effecting the elongation at break of the composite.

Info:

* - Corresponding Author

[1] Ashok Kumar M., Ramachandra Reddy, G., Harinatha Reddy G., Chakradhar K. V. P. International Journal of Materials and Biomaterials of Analysis 1(1) (2011) 6-10.

Google Scholar

[2] Ashok Kumar, M., Ramachandra Reddy G., Siva Bharathi, Y., Venkata Naidu, S., Naga Prasad Naidu V., Journal of Composite Materials 46(26) (2010) 3195-3202.

DOI: 10.1177/0021998310371551

Google Scholar

[3] Ashok Kumar, M., Ramachandra Reddy, G., Hemachandra Reddy K., Venkata Mohana Reddy Y., Ranga Reddy P., Subbarami Reddy N., Indian Journal of Material Science 23 (2011) 345-250.

DOI: 10.1007/s12221-012-0769-5

Google Scholar

[4] Ashok Kumar, M., Hemachandra Reddy K., Ramachandra Reddy G., Venkata Mohana Reddy Y., Subbarami Reddy N., Indian Journal of Macromolecules 24 (2011) 241-249.

Google Scholar

[5] Benjamin Dauda S., Olutunde O., Prasad P., Applied Composite Materials 16 (2009) 15-31.

Google Scholar

[6] Dani J., Varada Rajulu A., Guduri B. R. Journal of Reinforced Plastics and Technology 27 (2008) 1833-1838.

Google Scholar

[7] Jayaramudu J., Obi Reddy K., Uma Maheswari C., Jeevan Prasad Reddy D., Varda Rajulu A., Journal of Reinforced Plastics and Composites 28 (2009) 2177-2181. [8] Sapuan S. M., Leenie A., Harimi M, Beng Y. K., Des 27 (2006) 689-93.

DOI: 10.1177/0731684408092066

Google Scholar

[9] Mukhopadhyay S., Srikanta S., Polym Degrad Stabil 93 (2008) 2048-51.

Google Scholar

[10] Justiz-Smith N. G., Junior Virgo G., Buchanan V. E., Mater Charact 59 (2008) 1273-8.

Google Scholar

[11] Okubo K., Fujii T., Eco-composites using bamboo and other natural fibers and their mechanical properties, Proc. of International Workshop on Green Composites, 2002, 17-21.

Google Scholar

[12] Kongkeaw P., Nhuapeng W., Thamjaree W., The influence of alkaline treatment on tensile properties of short bamboo (Thyrsostachys Siamensis Gamble) fiber reinforced epoxy resin composites. The 2nd CMU Graduate Research Conference 2 (2010) 264-269.

DOI: 10.1088/1742-6596/2175/1/012004

Google Scholar

[13] Joseph K., Varghese S., Kalaprasad G., Thomas S., Prasannakumari L., Koshy P., Pavithran C., Eur. Ploym. J. 32 (1996) 1243-1250.

DOI: 10.1016/s0014-3057(96)00051-1

Google Scholar

[14] Chumsamrong P., Sutapun W., Kiaw-on S., Tonuloon W., Influence of alkali treated rossells fibers on the tensile properties of unsaturated polyester resin, 31st Congress on Science and Technology, 2005.

Google Scholar

[15] Jones F. R., J. Engineering Materials 37 (1996) 116-117.

Google Scholar

[16] Wambua P., Ivens J., Verpoest I., Journal of Composite Science and Technology 63 (2003) 1259-1264.

Google Scholar

[17] Mathews F. L., Rawlings R. D., Composites Materials Engineering and Science, Chapman and Hall, London 1999.

Google Scholar

[18] Mohamed Yusoff M. Z., Salit M. S., Ismail N., Wirawan R., Sains Malaysiana 39 (2010) 87- 92.

Google Scholar

[19] Arib R. M. N., Sapuan S. M., Ahmad M. M. H. M., Paridah M. T., Khairul Zaman H. M. D., Materials & Design 27 (2006) 391-396.

DOI: 10.1016/j.matdes.2004.11.009

Google Scholar

[20] Lee S. M., Cho D., Park W. H., Lee S. G., Han S. O., Drzal L. T., Composites Science and Technology 65 (2005) 647-657. ( Received 19 December 2013; accepted 24 December 2013 )

Google Scholar